Engineering a brighter tomorrow. 0333-2506824Sat–Thu · 11am–10pm
Back to products
SolaX / Inverters

SolaX 8kW Hybrid Inverter

8kW single-phase low-voltage hybrid manufacturer reference with two MPPTs, LCD display, a 40–60V battery connection and IP65 protection. Manufacturer reference: the model below matches the listed capacity and product family, but AJ Solar has not confirmed the exact stocked model suffix, hardware generation or regional configuration. Verify the nameplate and battery compatibility before ordering.

PKR 300,000

Ask us for the current price and availability.

Buy Now on WhatsApp
Review your solar package →
We’ll check equipment compatibility before recommending your complete system.
  • Two MPPTs, 32 / 32A maximum input
  • 40–60V battery input
  • 190 / 190A charge / discharge current
  • Backup switchover <6ms
  • LCD interface and IP65 protection
  • Up to 3 parallel units in on-grid/off-grid operation; configuration requirements apply

Product overview

Brand
SolaX
Model
X1-Lite-8K-LV · manufacturer reference
Capacity
8 kW
System type
Hybrid
Warranty
Confirm with AJ Solar
Availability
Confirm on WhatsApp

Make it a complete solution.

Add this product to your package and tell us about your property. We can help with load assessment, system design, installation and ongoing support.

Specifications are taken from the manufacturer’s product information for the model shown. Your quotation will confirm the supplied configuration, compatible equipment and local warranty coverage.

ENGINEERING DETAILS

Technical specifications

X1-Lite-8K-LV · manufacturer reference · Select a section to view its specifications.

System
Phase
Single phase manufacturer reference; phase is unspecified in existing AJ Solar title
Inverter type
Hybrid, low-voltage battery manufacturer reference
Reference model
X1-Lite-8K-LV
Series
X1 Lite LV
PV input
Maximum recommended PV array power
16,000 Wp
Maximum PV input voltage (2)
600 V
Rated PV input voltage
360 V
Operating voltage range
50–550 V
Start-up voltage
110 V
MPP trackers / strings per tracker
2 / (2 / 2)
Maximum input current per MPPT
32 / 32 A
Maximum input short-circuit current per MPPT
40 / 40 A
AC input and output (on-grid)
Rated output power
8,000 W
Rated output current
34.8 A @ 230 V
Maximum output apparent power
8,800 VA
Maximum continuous output current
38.3 A @ 230 V
Rated AC voltage
220 / 230 / 240 V
Maximum AC input apparent power
12,650 VA
Maximum AC input current
55 A @ 230 V
Maximum continuous AC passthrough (grid to load)
75 A
Rated AC frequency
50 / 60 Hz
AC frequency range (3)
50 ± 5 Hz / 60 ± 5 Hz; country code dependent
Adjustable power factor range
Approximately 1; adjustable 0.8 lagging to 0.8 leading
THDi at rated power
<3%
Battery
Battery type
LFP / lead-acid
Battery voltage range
40–60 V
Maximum charge / discharge current
190 / 190 A
EPS off-grid output (with battery)
Rated EPS output voltage / frequency
230 V, 50 / 60 Hz
Rated EPS output power
8,000 VA
Peak EPS output power
16,000 VA; 2 times rated power for 10 s
Switchover time
<6 ms
Efficiency
Maximum efficiency
97.6%
European efficiency
97.0%
Environment limit
Ingress protection
IP65
Operating temperature range
−25 to +60°C; derating above 45°C
Maximum operating altitude
3,000 m
Relative humidity
4–100% RH, condensing
Overvoltage category
Mains III; battery II; PV II
General
Dimensions (W × H × D)
462 × 651 × 280 mm
Net weight
38.5 kg
Cooling concept
Smart air cooling
Communication interfaces
RS485, CAN, USB, DI/DO
Display
LCD
Topology
Non-isolated for PV side / high-frequency for battery side
Certifications
IEC/EN 62109-1/-2, NRS 097-2-1, IEC 61727, IEC 62116, PEA, MEA, BIS
Protection
Protections
Over/under voltage protection, DC isolation protection, DC reverse-polarity protection, grid monitoring, DC injection monitoring, back feed current monitoring, overtemperature protection
Active anti-islanding method
Frequency shift
Surge protection (DC / AC)
DC Type II / AC Type II
Arc-fault circuit interrupter (AFCI)
Optional; feature upgrade qualifier applies
Let’s talk solar